Blog sidebar

Category

Recent Posts

What should I check before installing the 30kg Servo on my YIKONG YK8081?
When installing the YK8081 RC Car Parts 30kg Servo (80065) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the servo spline count and orientation match...
My YIKONG YK8081 jerks during acceleration – is it the motor?
Acceleration jerking isn't necessarily a motor failure – it could also be improper 120A ESC (80063) settings or insufficient battery discharge. Check that the battery...
What battery types does the 120A Brushless ESC support?
The YIKONG YK8081 120A Brushless ESC supports 3S and 4S LiPo batteries . Using a 4S battery will allow the vehicle to achieve its maximum speed of up to 85...
In News

Is the YIKONG YK4101 RC Car Horizontal Universal Shaft (Part No. 13035) easy to break?

Under normal driving conditions, the YIKONG YK4101 RC Car Horizontal Universal Shaft (Part No. 13035) is not easy to break. This original universal shaft is designed to handle everyday driving, light off-road use, and rock crawling, offering good durability when installed correctly and used as intended.

However, if the YIKONG YK4101 RC Car Horizontal Universal Shaft (Part No. 13035) is repeatedly subjected to hard acceleration, aggressive jumps, or full throttle while the wheels are jammed, the impact load on the shaft increases significantly. Over time, this may cause it to bend or even break.

To help extend the service life of the YIKONG YK4101 RC Car Horizontal Universal Shaft (Part No. 13035), inspect it regularly for signs of wear, bending, or looseness, and keep the drivetrain clean. Applying a small amount of grease to the moving joints when needed can also help reduce wear and keep your YIKONG YK4101 RC Car running smoothly.

YIKONG YK4101 RC Car Horizontal Universal Shaft (Part No. 13035)

Comments have to be approved before showing up

YOU MAY ALSO LIKE

Category

Recent Posts

What should I check before installing the 30kg Servo on my YIKONG YK8081?
When installing the YK8081 RC Car Parts 30kg Servo (80065) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the servo spline count and orientation match...
My YIKONG YK8081 jerks during acceleration – is it the motor?
Acceleration jerking isn't necessarily a motor failure – it could also be improper 120A ESC (80063) settings or insufficient battery discharge. Check that the battery...
What battery types does the 120A Brushless ESC support?
The YIKONG YK8081 120A Brushless ESC supports 3S and 4S LiPo batteries . Using a 4S battery will allow the vehicle to achieve its maximum speed of up to 85...