The YIKONG YK4107 Bearing 5×11×4 (21120) is a metal ball bearing used in the drivetrain and rotating assemblies of the crawler. Its main function is to...
Grinding or clicking noises from the drivetrain of your YIKONG YK4107 can be caused by worn, dry, or damaged bearings, including the Bearing 12x18x4 (21122). If...
Your YK8081 leaning to one side after installing new Shock Absorbers (80040) usually means the spring preload is not evenly adjusted on both sides. This is a common installation issue. Check that both shocks are filled with the same amount of oil and that the spring collars are set to equal...
Yes, as long as the shock body and piston shaft are not damaged. The seals on the YIKONG YK8081 RC Car Parts Shock Absorber (80040) are replaceable wear parts – just replace the seals and refill with fresh shock oil. However, if the shaft is bent or the body is deformed, seal replacement won't fix it,...
The YIKONG YK4107 Bearing 5×11×4 (21120) is a metal ball bearing used in the drivetrain and rotating assemblies of the crawler. Its main function is to...
Grinding or clicking noises from the drivetrain of your YIKONG YK4107 can be caused by worn, dry, or damaged bearings, including the Bearing 12x18x4 (21122). If...