Blog sidebar

Category

Recent Posts

What should I check before installing the 30kg Servo on my YIKONG YK8081?
When installing the YK8081 RC Car Parts 30kg Servo (80065) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the servo spline count and orientation match...
My YIKONG YK8081 jerks during acceleration – is it the motor?
Acceleration jerking isn't necessarily a motor failure – it could also be improper 120A ESC (80063) settings or insufficient battery discharge. Check that the battery...
What battery types does the 120A Brushless ESC support?
The YIKONG YK8081 120A Brushless ESC supports 3S and 4S LiPo batteries . Using a 4S battery will allow the vehicle to achieve its maximum speed of up to 85...
In News

Why won't my MJX Hyper Go H12Y RC Car power on even with a fully charged battery?

If the battery is fully charged but the vehicle will not power on, the MJX Hyper Go H12Y RC Car Parts ESC E45M with Swich or its power switch may be damaged or have a loose connection. Check the battery plug, switch, and wiring first. If they are in good condition, replacing the original ESC E45M with Switch can restore normal operation.

Comments have to be approved before showing up

YOU MAY ALSO LIKE

Category

Recent Posts

What should I check before installing the 30kg Servo on my YIKONG YK8081?
When installing the YK8081 RC Car Parts 30kg Servo (80065) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the servo spline count and orientation match...
My YIKONG YK8081 jerks during acceleration – is it the motor?
Acceleration jerking isn't necessarily a motor failure – it could also be improper 120A ESC (80063) settings or insufficient battery discharge. Check that the battery...
What battery types does the 120A Brushless ESC support?
The YIKONG YK8081 120A Brushless ESC supports 3S and 4S LiPo batteries . Using a 4S battery will allow the vehicle to achieve its maximum speed of up to 85...