News

Blog sidebar

Category

Recent posts

What should I check before installing the 30kg Servo on my YIKONG YK8081?
When installing the YK8081 RC Car Parts 30kg Servo (80065) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the servo spline count and orientation match...
My YIKONG YK8081 jerks during acceleration – is it the motor?
Acceleration jerking isn't necessarily a motor failure – it could also be improper 120A ESC (80063) settings or insufficient battery discharge. Check that the battery...
What battery types does the 120A Brushless ESC support?
The YIKONG YK8081 120A Brushless ESC supports 3S and 4S LiPo batteries . Using a 4S battery will allow the vehicle to achieve its maximum speed of up to 85...
Why did the shock tower on my MJX Hyper Go 16209 RC Car break after a hard landing?

The MJX Hyper Go 16209 RC Car Parts Shock Tower absorbs suspension loads during jumps and impacts. Hard landings or high-speed crashes can crack or bend the shock tower. Replacing it restores proper shock mounting and suspension performance.

Why is my MJX Hyper Go 20208 RC Car making a grinding noise from the transmission?

Grinding or clicking noises from the gearbox may indicate that the MJX Hyper Go 20208 RC Car Parts Metal Drive Spur Gear P2040 is worn, chipped, or improperly meshed with the motor pinion gear. Replacing the spur gear and correctly adjusting the gear mesh will help restore smooth and efficient...

Why should I replace the MJX Hyper Go 20208 RC Car Parts Rear Bumper P2010 after a crash?

If the rear bumper is cracked, bent, or broken after an impact, it can no longer provide effective protection for the rear chassis and body. Replacing the MJX Hyper Go 20208 RC Car Parts Rear Bumper P2010 helps restore rear-end protection and reduce damage during future collisions.

Why should I replace the MJX Hyper Go 20208 RC Car Parts Front Bumper with Light 2011B after a crash?

A cracked or deformed bumper can no longer absorb impacts effectively, which may increase the risk of damage to the chassis and front suspension. Replacing the MJX Hyper Go 20208 RC Car Parts Front Bumper with Light 2011B helps restore front-end protection and keeps the LED light functioning properly.

Is the MJX Hyper Go H8P RC Car Parts Metal Transmission Servo S1745B easy to install?

Yes. The MJX Hyper Go H8P RC Car Parts Metal Transmission Servo S1745B is an original replacement part that fits the factory mounting points and wiring. No modification is required. After installation, check and adjust the servo travel to ensure smooth gear shifting.

Why won't my MJX Hyper Go H12Y RC Car power on even with a fully charged battery?

If the battery is fully charged but the vehicle will not power on, the MJX Hyper Go H12Y RC Car Parts ESC E45M with Swich or its power switch may be damaged or have a loose connection. Check the battery plug, switch, and wiring first. If they are in good condition,...

Category

Recent posts

What should I check before installing the 30kg Servo on my YIKONG YK8081?
When installing the YK8081 RC Car Parts 30kg Servo (80065) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the servo spline count and orientation match...
My YIKONG YK8081 jerks during acceleration – is it the motor?
Acceleration jerking isn't necessarily a motor failure – it could also be improper 120A ESC (80063) settings or insufficient battery discharge. Check that the battery...
What battery types does the 120A Brushless ESC support?
The YIKONG YK8081 120A Brushless ESC supports 3S and 4S LiPo batteries . Using a 4S battery will allow the vehicle to achieve its maximum speed of up to 85...