The MJX HYPER GO 43308 RC Car uses an independent suspension system, meaning all four wheels move up and down independently rather than being connected by...
YIKONG YK4107Pro RC Car Parts Shock Absorber Shaft 21096 Use the steering trim on the transmitter, or check whether the shocks are leaking or bent. A bent shock shaft (part number 21096) on the YIKONG YK4107 RC Car restricts suspension movement and causes pulling, requiring replacement. Also check whether the...
Check whether the bearings (5×11×4, part number 21120) are worn, dry, or damaged, and replace if necessary. Driveshaft-related parts: center universal joint coupler 21029, transverse universal drive shaft 21043, and rear straight axle shaft 21044.
YIKONG YK4107Pro 1/10 4WD Climbing RC Crawler
On the YIKONG YK4107 RC Car brushed version, drag brake strength can be adjusted via the transmitter (CH5). This function is not adjustable on the Pro brushless version.
YIKONG YK4107Pro 1/10 4WD Climbing RC CrawlerCheck that all screws are tight, tires are properly installed, and the transmitter responds correctly. Do a low-speed test run in an open area. On the first battery charge of the YIKONG YK4107 RC Car, drive smoothly on flat ground to let the motor...
The MJX HYPER GO 43308 RC Car uses an independent suspension system, meaning all four wheels move up and down independently rather than being connected by...