News

When installing the YIKONG YK8081 RC Car PartWheels (80061) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the wheel hex hub size is 12mm, which is the standard size for the DF8 model. Additionally, check that the wheel offset and width match your vehicle's specifications to ensure proper clearance and handling....

The YIKONG YK8081 RC Car Parts Tyre Wheel Glued (80060) is a pre-assembled component, requiring minimal maintenance beyond regular cleaning. However, a key precaution is to inspect the glue seam between the tyre and wheel regularly – if the glue starts to separate, the tyre may spin on the wheel under high torque from the YIKONG...

Not necessarily. Lights not working could be a faulty LED Board (80059) , broken wires, or insufficient power from the receiver. Check all connectors are secure, and test the input voltage to the LED board with a multimeter. If voltage is present but lights don't work, the LED board is likely damaged...

Yes. The YK8081 RC Car Parts Roof Light Mount (80058) plastic surface can be painted, but it's recommended to use model-specific PS or TS spray paint. An important precaution is to lightly sand the surface with fine sandpaper before painting for better adhesion, and apply several thin coats rather than one thick coat. This...

The YIKONG YK8081 RC Car Parts Body R-Clips, Body Clip Strap, Limit Strap (80057) is listed on the official YIKONG parts website, though it may be out of stock at some retailers. You can check with authorized dealers who sell YIKONG RC car parts, providing the original factory part number 80057 for availability...

Not immediately, but the risk increases significantly. The Roof Anti Scratch Strip (80056) is the first line of defense for your YIKONG YK8081 RC CAR – without it, the roof paint will directly rub against the ground during rollovers. It's recommended to replace the strip as soon as it becomes loose or falls off,...