News

Blog sidebar

Category

Recent posts

What should I check before installing the 30kg Servo on my YIKONG YK8081?
When installing the YK8081 RC Car Parts 30kg Servo (80065) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the servo spline count and orientation match...
My YIKONG YK8081 jerks during acceleration – is it the motor?
Acceleration jerking isn't necessarily a motor failure – it could also be improper 120A ESC (80063) settings or insufficient battery discharge. Check that the battery...
What battery types does the 120A Brushless ESC support?
The YIKONG YK8081 120A Brushless ESC supports 3S and 4S LiPo batteries . Using a 4S battery will allow the vehicle to achieve its maximum speed of up to 85...
The Rear Driveshaft (Dogbone) Keeps Popping Out. How Can I Fix It?

If the YIKONG YK4084 RC Car rear driveshaft (dogbone) keeps popping out, a simple and effective solution is to place a small compression spring inside the rear drive cup before installing the dogbone. The spring applies light pressure to keep the dogbone engaged in the drive cup, greatly reducing the chance...

Category

Recent posts

What should I check before installing the 30kg Servo on my YIKONG YK8081?
When installing the YK8081 RC Car Parts 30kg Servo (80065) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the servo spline count and orientation match...
My YIKONG YK8081 jerks during acceleration – is it the motor?
Acceleration jerking isn't necessarily a motor failure – it could also be improper 120A ESC (80063) settings or insufficient battery discharge. Check that the battery...
What battery types does the 120A Brushless ESC support?
The YIKONG YK8081 120A Brushless ESC supports 3S and 4S LiPo batteries . Using a 4S battery will allow the vehicle to achieve its maximum speed of up to 85...