Blog sidebar

Category

Recent Posts

MN Model MN76 RC Car Review: A New LC76 Member With Great Modification Potential
The MN LC family has welcomed a new member—the officially licensed LC76. Today, let's take a closer look at the details and modification potential of...
MJX Hyper Go 43308 RC Car Quick Review
The new MJX Hyper Go 43308 RC Car is a 1/43-scale mini drift car with impressive factory tuning that punches above its class. Its adjustable wheelbase...
How do I adjust the preload using the Shock Absorber Adjustment Ring?
To adjust preload on the YIKONG YK4061 Shock Absorber Adjustment Ring (26033) , turn the threaded ring clockwise to compress the spring (stiffer) or counterclockwise to...
In News

The magnetic shell is easy to separate during the actual climbing tour, is there any good fixing method?

Magnetic shell is not strong, the shell will fall off when you turn over the car, not as practical as R buckle, if you want to say a better fixing method, I think it is to replace the larger specification, higher grade of strong magnets (such as higher grade N52, thicker strong magnets).

But note!!! It is only recommended to replace the front (or back) magnet, so that as long as the front can be opened, the back will open smoothly.

Then you can also hold the car shell to carry up at the same time also not separated, to achieve the desired effect. Don't replace the front and back with strong magnets! Otherwise the car shell may be difficult to open.

Comments have to be approved before showing up

YOU MAY ALSO LIKE

Category

Recent Posts

MN Model MN76 RC Car Review: A New LC76 Member With Great Modification Potential
The MN LC family has welcomed a new member—the officially licensed LC76. Today, let's take a closer look at the details and modification potential of...
MJX Hyper Go 43308 RC Car Quick Review
The new MJX Hyper Go 43308 RC Car is a 1/43-scale mini drift car with impressive factory tuning that punches above its class. Its adjustable wheelbase...
How do I adjust the preload using the Shock Absorber Adjustment Ring?
To adjust preload on the YIKONG YK4061 Shock Absorber Adjustment Ring (26033) , turn the threaded ring clockwise to compress the spring (stiffer) or counterclockwise to...