Blog sidebar

Category

Recent Posts

What Is the Difference Between the MJX Hyper Go 43308 RC Car and 43311? Body Style and Specs Compared
The core difference between the MJX Hyper Go 43308 RC Car and the 43311 lies in their body licensing and exterior style. The 43308 RC Car...
What Material Is the Body of the MJX HYPER GO 43308 RC Car? Magnetic Quick-Release and Scale Details Explained
The body of the MJX HYPER GO 43308 RC Car is made of one-piece cast aluminum alloy and is secured by front and rear magnetic quick-release...
What Is the Suspension System on the MJX HYPER GO 43308 RC Car? Independent Suspension Explained
The MJX HYPER GO 43308 RC Car uses an independent suspension system, meaning all four wheels move up and down independently rather than being connected by...
In News

Which Tires Fit the MJX Hyper Go H10G RC Car 1.9-Inch Beadlock Wheels?

[MJX HYPER GO H10G 1/10 4WD Off-road All Rock RC Crawler]

The stock tires are fine on dry rock. On the MJX Hyper Go H10G RC Car, wet mud and mossy stone are where the soft stock compound falls short, but that's a tire characteristic rather than a quality defect.

Stock Configuration

The truck runs 1.9-inch scale beadlock wheels with 118 × 42.5mm rubber tires, and the beadlock design means you can change tires without changing wheels.

Real-World Performance

The stock compound is on the soft side and grips well on dry surfaces, though in wet mud it packs up easily and tread self-cleaning trails harder mud tires. The real value of beadlocks is easy tire swaps later.

Maintenance and Upgrades

Don't gorilla the beadlock screws, because aluminum threads are softer than nylon and will strip. After water or mud runs, break the tires down and dry them, since foam inserts that stay wet go moldy and heavy.

FAQ

Q: What spec should I buy for better grip?
A: Any 1.9-inch tire around 118mm outer diameter fits. Just check the dimensions.

Conclusion

The stock wheels are a practical design, and on the MJX Hyper Go H10G RC Car you choose tires by terrain rather than swapping wheels.

MJX Hyper Go H10G RC Car Wheels & 118mm Tires

Comments have to be approved before showing up

YOU MAY ALSO LIKE

Category

Recent Posts

What Is the Difference Between the MJX Hyper Go 43308 RC Car and 43311? Body Style and Specs Compared
The core difference between the MJX Hyper Go 43308 RC Car and the 43311 lies in their body licensing and exterior style. The 43308 RC Car...
What Material Is the Body of the MJX HYPER GO 43308 RC Car? Magnetic Quick-Release and Scale Details Explained
The body of the MJX HYPER GO 43308 RC Car is made of one-piece cast aluminum alloy and is secured by front and rear magnetic quick-release...
What Is the Suspension System on the MJX HYPER GO 43308 RC Car? Independent Suspension Explained
The MJX HYPER GO 43308 RC Car uses an independent suspension system, meaning all four wheels move up and down independently rather than being connected by...