News

The YIKONG YK8081 120A Brushless ESC supports 3S and 4S LiPo batteries . Using a 4S battery will allow the vehicle to achieve its maximum speed of up to 85 km/h .  

The foam insert in the YIKONG YK8081 RC Car Parts Tyre & Insert (80062) set provides internal support for the tyre, maintaining its shape under load and preventing the tyre from deforming during high-speed cornering. It's a crucial component for consistent handling on your YIKONG YK8081 RC Truck.

When installing the YIKONG YK8081 RC Car PartWheels (80061) on your YIKONG YK8081 RC Truck, a key precaution is to confirm the wheel hex hub size is 12mm, which is the standard size for the DF8 model. Additionally, check that the wheel offset and width match your vehicle's specifications to ensure proper clearance and handling....

The YIKONG YK8081 RC Car Parts Tyre Wheel Glued (80060) is a pre-assembled component, requiring minimal maintenance beyond regular cleaning. However, a key precaution is to inspect the glue seam between the tyre and wheel regularly – if the glue starts to separate, the tyre may spin on the wheel under high torque from the YIKONG...

Not necessarily. Lights not working could be a faulty LED Board (80059) , broken wires, or insufficient power from the receiver. Check all connectors are secure, and test the input voltage to the LED board with a multimeter. If voltage is present but lights don't work, the LED board is likely damaged...

Yes. The YK8081 RC Car Parts Roof Light Mount (80058) plastic surface can be painted, but it's recommended to use model-specific PS or TS spray paint. An important precaution is to lightly sand the surface with fine sandpaper before painting for better adhesion, and apply several thin coats rather than one thick coat. This...